Changing Modules - Gateway C-140S Reference Manual

Changing modules

Your convertible notebook's modular bay supports different
bay modules, such as a CD, combination DVD/CD-RW, or
multi-format DVD±RW drive, or a multibay battery.
To change bay modules:
1
2
3
4
5
6
52
CHAPTER 4: Using Drives and Accessories
If you are removing a drive, make sure that there is no
disc in it.
Make sure that the convertible notebook is not in Sleep
or Hibernate mode.
Caution
If you are replacing a multibay battery, turn off the convertible
notebook if it does not have a charged main battery and is not directly
connected to AC power.
Make sure that the LCD panel is in notebook mode, then
close the LCD panel. For more information, see
"Converting from notebook to tablet mode" on page
Disconnect your convertible notebook from the optional
port replicator.
Turn your convertible notebook over so the bottom is
facing up.
Remove the modular bay lock screw (if one is present),
then slide and hold the module bay latch. The module
may move out slightly.
Modular bay lock screw
43.