Adjusting The Display Properties - Gateway C-140S Reference Manual

5
6
7

Adjusting the display properties

If the image on the projector, monitor, or television does not
appear correctly, or if you want to use the display as an
extension of your convertible notebook desktop, you should
adjust the display properties on the projector, monitor, or
television.
To adjust the display properties on a projector, monitor,
or television:
1
www.gateway.com
Plug the projector's, monitor's, or television's, power
cord into an AC power source and turn it on.
Windows recognizes the new hardware and the New
Display Detected dialog box opens.
Select the options for the projector monitor, or
television, then click or tap OK.
Press F +F4 to switch between viewing the display on
N
the LCD panel, viewing the display on the projector,
monitor, or television, and viewing the display on both
the LCD panel and the projector, monitor, or television.
Important
If a monitor, projector, or television is connected and you close
the LCD panel, your convertible notebook may turn off the LCD panel,
but will not enter Sleep mode.
Press the Mobility Center button
Mobility Center window opens.
Tip
For more information about the Windows Mobility Center, see
"Using the Windows Mobility Center" in your online User Guide.
. The Windows
61