Pointing Device; Power; Printer - Gateway C-140S Reference Manual

Pointing device

See

Power

Your convertible notebook is not working on AC power
•
•
•
Your convertible notebook is not working on battery power
•
•
•
•
•

Printer

then click or tap Help and Support. Type the keyword printer
troubleshooting in the Search Help box, then press E
138
CHAPTER 9: Troubleshooting
"Touchpad or pointing device" on page
Make sure that your AC power adapter is connected
correctly to your convertible notebook. For instructions
on connecting the AC power adapter, see
the AC adapter" on page
If your convertible notebook is plugged into a surge
protector, make sure that the surge protector is
connected securely to an electrical outlet, turned on,
and working correctly. To test the outlet, plug a working
device, such as a lamp, into the outlet and turn it on.
Make sure that the AC power adapter cables are free
from cuts or damage. Replace any damaged cables.
Check the power management settings. For more
information about using power management settings,
see "Changing convertible notebook power settings" on
page 75.
Make sure that the batteries are installed correctly. For
instructions on inserting your batteries, see
batteries" on page
Make sure that the batteries are fully recharged. For
more information about recharging the batteries, see
"Recharging the batteries" on page
Make sure that the batteries are calibrated correctly. For
instructions on recalibrating your batteries, see
"Recalibrating the batteries" on page
Let the batteries return to room temperature.
Help
For more information about printer troubleshooting, click or tap Start,
16.
69.
68.
141.
"Connecting
"Changing
71.
.
NTER