System Features - Honeywell LYNXRPK-2 - Wireless Self-Contained Security Syste - LYNXRPK-2 - Wireless Self-Contained Security System Installation And Setup Manual

LYNXR-2 Series is not intended for UL985 Household Fire applications unless a 24-hour backup battery
UL UL
UL UL
(P/N LYNXRCHKIT-HC or LYNXRCHKIT-SHA) is installed.
Powerline Carrier Devices have not been evaluated by UL.
The LYNXR-2 Series control is a self-contained, rechargeable wireless control/communicator that features
easy installation and usage. A built-in speaker provides voice annunciation of system status along with voice
descriptors of each zone. An internal module (if provided) allows the LYNXR-2 Series to communicate with
the Central Station via the Internet. The following illustration highlights the main features of this system.
ZONES and DEVICES
• Up to 24 wireless zones
(5800 Series transmitters)
• Up to 16 wireless button zones
• Up to 8 powerline carrier devices
• Supports wireless keypads
8 USER CODES
• Installer code
• Master code
• 5 Secondary codes
• Duress code
• 3 Panic functions
COMMUNICATION
• Ademco Low Speed
• Sescoa/Radionics
• Ademco Express
• Ademco Contact ID
• Paging feature
• Internet central station
communication
• GSM cellular central
station communication
PROGRAMMING
• Options stored in EEROM
• Can be uploaded, downloaded or
controlled via IBM-compatible
computer using Compass
downloader software and specified
HAYES modem or via capable GSM
or IP communications module
• Voice prompt programming mode
FEATURES
• Real-time clock display and Fixed-Word display
• Message center (for user recorded messages)
• Voice announcement of system and zone status
• Voice chime
• Alarm clock
• Reminder
• X10 scheduling
• Latch key reports
• Automatic stay arming
• Remote phone control
• "Follow me" reminder and system Announcements
OTHER FEATURES
• Exit error feature (detects difference between an
actual alarm and exit alarm caused by leaving a door
open after the exit delay expires)
• Event log stores up to 84 events
• Macro/ 1-button paging
• RF jam detection
• Remote phone control
• Compatible with encrypted (high-security) devices
- 5 -
LYNXR-2 Series Installation and Setup Guide

System Features

• Primary Power: Ademco K10145X10
• Backup battery: Rechargeable
SYSTEM POWER
plug-in transformer, 110VAC to
9VAC, 25VA output (K10145CN in
Canada)
nickel-metal hydride battery pack
rated at 7.7Vdc.
ALARM OUTPUT
• Built-in sounder
• Piezo output
(30mA max.)
• Bell output
(120mA max.)
• Steady output for
burglary/panic
• Temporal pulse
output for fire alarms
• Long range
radio/audio alarm
verification
SPECIAL FEATURES
• Two-way voice communication
• Speaker phone operation
• Supports AlarmNet remote
services