Installing And Removing The Rack Handles; Installing The Rack Handles; Figure 78. Installing The Rack Handle - Intel SR1530HSH - Server System - 0 MB RAM User Manual

Installing and Removing the Rack Handles

Installing the Rack Handles

1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. If it is installed, remove the front bezel if it is installed. For instructions, see
"Removing the Front Bezel" on page
4. Attach the rack handle to the server system with two screws as shown in Figure 78.
5. Repeat Step 4 on the opposite side of the server.
6. (Optional) Install the front bezel, if desired. For instructions, see
Front Bezel" on page
7. Plug all peripheral devices and the AC power cable into the server.
®
Intel Server System SR1530SH/SR1530HSH User's Guide
iii.
22.

Figure 78. Installing the Rack Handle

23.
AF001204
"Installing the
"Safety
85