Figure 28. Locating Drive Positions (Sr1530Sh); Figure 29. Removing Drive Carrier From The Server System (Sr1530Sh) - Intel SR1530HSH - Server System - 0 MB RAM User Manual

5. HDD1 location only: Slide the power cables from the cable clip located on the top
of the hard drive carrier.
6. Remove the screw that holds the hard drive bracket to the chassis. See letter "A" in
Figure 29. Save this screw. You will use it to reinstall the drive assembly later.
7. Lift the drive carrier from the chassis. See letter "B" in Figure 29.

Figure 29. Removing Drive Carrier from the Server System (SR1530SH)

38

Figure 28. Locating Drive Positions (SR1530SH)

A
Intel
B
AF001050
®
Server System SR1530SH/SR1530HSH User's Guide
AF002322