Table of Contents
Advertisement
4.2.2 Reset Main Control Board Resident Programming
This programming sequence will reset the programming specific to each resident to the 1885 main
control board factory default values. This function will take about 5 minutes to complete. The power
LED on the main control board will flash during the process. The LED becomes steady ON when
completed.
NOTE: This command will perform command function 91 (4.2.1) automatically.
1. Take the doorman telephone off hook.
2. Press *90 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3. Enter 9 9 9 9 then press * (beep).
4. Hang up the doorman telephone to end the programming session.
Function
Section
18
3.2.3
15
3.2.4
11
3.3.3
00
3.4.3
21
3.5.2
22
3.5.3
23
3.5.4
39
3.6.2
49
3.6.4
48
3.6.7
43
3.7.3
1820-065-B-2-06
Default
Description
Turns off doorman / lobby call option
Delete all directory code programming
Delete all preprogrammed phone numbers
Delete all entry codes
0
Do not disturb timer OFF
0
Scheduled do not disturb OFF
Scheduled do not disturb set to 12:00 AM – 06:00 AM
Sunday - Saturday
0
Call forward OFF
Delete all call forwarding numbers
Delete all area code programming
0
Virtual doorman OFF
Page 51
Advertisement
Table of Contents
