Efi And The Reduced-Legacy Concept - IBM 88553RX Installation Manual

Installation guide
Table of Contents

Advertisement

Each bootable GPT disk must contain an EFI System Partition and it should be
the first partition on the disk, right after protective MBR, as shown in Figure 1-18.
Figure 1-18 Boot GPT disk structure
The EFI specification supports only FAT or FAT32 on the ESP partition. The ESP
is not visible to the operating system's users by default, but can be accessed for
read/write operations from within the operating system by special commands.
For Windows-specific information, see "Accessing EFI System Partition from
Windows" on page 147. For Linux information, see "Partitions on IA-64 Linux" on
page 166.
Note that a non EFI disk partitioning tool would not understand Figure 1-18 and
will see it as Figure 1-17 on page 32.

1.10.3 EFI and the reduced-legacy concept

The EFI is
firmware elements of the original PC architecture while advancing the PC's
stability and usability. These I/O components have been part of the PC
architecture for a long time. In the x455, there is no support in EFI for a parallel
port, ISA slots, mouse and keyboard ports, or a diskette drive.
Tip: A diskette drive can be used if the 64-bit operating system supports the
device, but the EFI does not support the use of a diskette drive. We
recommend that you use a USB memory key instead.
EFI replaces this support with the support for new technology such as bootstrap
loading from USB devices and the use of USB mouse and keyboard interfaces.
For more information about the EFI specification, see the following:
http://www.intel.com/technology/efi/index.htm
http://www.microsoft.com/hwdev/platform/firmware/EFI/default.asp
IBM Eserver xSeries 455 Planning and Installation Guide
34
EFI
System
Data partition(s)
Partition
(ESP)
reduced-legacy
, which means that it eliminates certain hardware and

Advertisement

Table of Contents
loading

This manual is also suitable for:

88554ru - eserver xseries 455Eserver xseries 455

Table of Contents