IBM 88553RX Installation Manual page 144

EFI Boot Maintenance Manager ver 1.10 [14.61]
Delete Boot Option(s). Select an Option
Windows Server 2003, Datacenter
EFI Shell [Built-in]
Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master)
Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master)/CDROM(Entry0)
Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master)/CDROM(Entry1)
Acpi(PNP0A03,1)/Pci(4|0)/Mac(0002551F808F)
Acpi(PNP0A03,1)/Pci(4|1)/Mac(0002559F808F)
Delete All Boot Options
Save Settings to NVRAM
Help
Exit
Delete selected Boot Option [Y-Yes N-No]: 78F531)/
\EFI\Microsoft\WINNT50\ia6 4ldrBoot0006
WINDOWS
Figure 4-33 Confirming the delete request
3. Select Yes to delete the option.
4. Save and exit.
5. The option has now been removed from the boot options.
Important: In the unlikely event that you have major problems and are not
able to get back the default options, then connect an auxiliary console (ANSI
terminal connected to the serial port) and press Shift+R when prompted to
restore the EFI defaults.
Changing the TimeOut value
To change the TimeOut value follow the steps below:
1. Select Set Auto Boot TimeOut from the EFI Boot Maintenance Manager.
The following screen will be displayed.
2. Set the timeout value.
3. Save and exit.
IBM Eserver xSeries 455 Planning and Installation Guide
130