Table of Contents
Advertisement
Figure 4-17 System Product Data window
To update the system firmware and the diagnostics (we always recommend that
you do both at once), follow these steps:
1. Select Flash Update from the EFI Firmware Boot Manager menu (Figure 4-2
on page 94). The following screen will be displayed.
Figure 4-18 Flash Update Utility
2. Press 1 then Enter to update the EFI/SAL.
3. You are asked if you wish to change the serial number, the machine type, and
the asset tag. Typically, you would answer No.
IBM Eserver xSeries 455 Planning and Installation Guide
114
Advertisement
Table of Contents
