IBM 88553RX Installation Manual page 164

NVRBOOT: OS Boot Options Maintenance Tool [Version 5.2.3683]
* 1. Windows Server 2003, Datacenter
2. EFI Shell [Built-in]
3. Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master)
4 Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master)/CDROM(Entry0)
5 Acpi(PNP0A03,0)/Pci(5|1)/Ata(Primary,Master)/CDROM(Entry1)
6. Acpi(PNP0A03,1)/Pci(4|0)/Mac(0002551F809E)
7. Acpi(PNP0A03,1)/Pci(4|1)/Mac(0002559F809E)
* = Windows OS boot option
(D)isplay (M)odify (C)opy E(x)port (I)mport (E)rase (P)ush (H)elp
(Q)uit
Select>
Select> x
Enter OS boot option to export (* = All - Maximum of 30): 1
Enter EXPORT file path: win2003
Saving boot option 1...
Saved Boot Option 1 to file: win2003.cfg
Use Import command to retrieve saved boot option
Press enter to continue
Select>q
Figure 4-48 Exporting Windows boot record with NVRBOOT.EFI
To recover the boot menu record, use the (I)mport command from the
NVRBOOT utility.
To illustrate the export/import process, here is an example. If you were to take a
set of disks from one x455 to another, you would do the following:
1. Export the Windows boot entry from the first server and save it on the EFI
System Partition (which is a partition on the disk).
2. Insert the disks into the second server.
3. Import the file.
4. Verify that the import was successful by booting from the newly created boot
entry.
IBM Eserver xSeries 455 Planning and Installation Guide
150