Adding Printers In Netware; Setup Using Ndps - Axis 27980R1 User Manual

Adding Printers in NetWare

Section 8 Adding Printers in NetWare

Setup using NDPS

Installing the Axis
Network Print Server
in the NDPS
environments
88
This section describes how to continue the installation of the AXIS 5570e
in the NetWare environment. Identify which transport protocol you are
running on your network and which installation method you should use.
Continue the installation by selecting the appropriate installing
instructions from the table below:
Installation
Transport protocol
method
TCP/IP
NDPS
IPX/SPX
iPrint over LPR
iPrint
iPrint over IPP
IPX/SPX
Basic Configuration
Queue-based
IPX/SPX
printing
Advanced
configuration
See "NetWare Administration" on page 113. for information on Novell's
administration tools.
If you intend to operate your AXIS 5570e in a multi-protocol, mixed
environment, you should also proceed to the other relevant sections in
this manual.
The AXIS 5570e supports Novell Distributed Print Services (NDPS). You
can run NDPS over Pure IP (TCP/IP) or IPX/SPX.
Before the AXIS 5570e can be installed, make sure that NDPS is installed
and a Broker is loaded on your NetWare file server.
Axis Network Print Server uses the AXIS NDPS Gateway for printing in
networks using either IP or IPX as transport protocols. The printer
gateways are included with the NDPS software (from version 5.1 and up)
and are automatically installed together with NDPS.
Having assigned an IP address to the AXIS 5570e as described in Setting
the IP Address, on page 15, you are now ready to install the Axis Network
Print Server for NDPS printing. You can select to install the connected
printers as public or controlled access printers. Follow the instructions
below to install the Axis Network Print Server using NDPS:
Action
See "Setup using NDPS" on page 88 and
"Public Access Printers" on page 89
"Controlled Access Printers" on page 93
See "Setup using iPrint" on page 102 and
"Install a printer using AXIS LPR Gateway Configuration
Snap-in" on page 105
See "Setup using iPrint" on page 102 and
"Install a printer with AXIS IPP Gateway Configuration
Snap-in" on page 104
To install using the AXIS NetPilot Installation Wizard,
see "Basic Setup with AXIS NetPilot" on page 107
If you need a more advanced installation that is not
covered by the AXIS NetPilot Installation Wizard, see
"Advanced Installation using AXIS NetPilot" on page
109
AXIS 5570e User's Manual