Table of Contents
Advertisement
Configuration Possibilities
802.1X Protocol
Settings
Important!
168
1. Select Admin | Security Settings | 802.1X.
2. Click Detailed View to configure the 802.1X EAP/TLS settings.
To configure and enable IEEE 802.1X, enter the following information:
1. Select EAPOL version (1 or 2), this must correspond to the EAPOL version
in your network switch.
2. Enter the user identity, EAP identity, associated with your certificate.
3. Enter the Private key password for your user identity.
4. If Verify server certificate validity period is enabled, the print server will
check that the certificate in the network switch is valid. If disabled, the level
of security will be lower as the print server will accept the certificate even
if it has expired.
5. Enter the current date for time validation. This is necessary in order to give
the print server the correct date at start up.
6. Select the 802.1X Enabled radio button.
7. Click OK to save the settings.
Time/date validation requires that SNTP is enabled. To enable SNTP, go to
Network Settings | Detailed View | TCP/IP Network and select the SNTP
Enabled radio button.
AXIS 5570e User's Manual
Advertisement
Table of Contents
