Axis 27980R1 User Manual page 48

Setting Up - IBM Mainframe (zSeries)
Verifying the
Communication:
48
LU id Category
0 Public
4 Public
5 Public
6 Public
7 Public
8 Public
9 Public
10 Public
11 Public
PU Profile Names
Maximum connections per client
Use IP client name
TN3270 NetWare User ID
Client Response Timer
Printer End of Job Timer
Summary of a report generated by Generate Server
Configuration Report (bold text = not default).
Follow the steps below to test the communication by sending a print job
to the Axis Network Print Server.
1. Make sure the printer is connected to the Axis Network Print Server and
the corresponding LU in the host is activated.
2. Send a print job from the host.
The Axis Network Print Server is now ready for use. If needed, it can be
further adapted to your system using the Web-based configuration pages
or IBM Printer Emulation. Please refer to Extended IBM Printer
Emulation, on page 179.
You can check the status of the TN3270E connection by printing a test page from the Print
Server. This is done by pressing the test button once. Make sure the TN3270E status (St:) line
for your server connection is defined as either:
• SSCP
• LU-1
• LU-3
For additional information about configuring other TN3270E servers, refer to the Technical
Notes on www.axis.com
VTAM LU Name Type
14
BRLTST04 1
BRLTST05 1
BRLTST06 1
BRLTST07 1
BRLTST08 1
BRLTST09 1
BRLTST0A 1
BRLTST0B 1
NetWare SAA
5
No
Admin
120
9999
Mod Termination
Method
2 TSELF
2 TSELF
2 TSELF
2 TSELF
2 TSELF
2 TSELF
2 TSELF
2 TSELF
2 TSELF
AXIS 5570e User's Manual