Table of Contents
Advertisement
Introduction
Section 1
Introduction
About this Manual
6
Thank you for purchasing the AXIS 5570e print server. This product has
been developed to connect your printers anywhere in your network,
allowing all network users access to the shared printer resources.
The AXIS 5570e is a LAN attached multi-protocol print server that prints
IBM and ASCII data streams to any ASCII printer. Supporting IBM
Mainframes, AS/400, NetWare, UNIX, LAN Server Manager, Windows
and Apple EtherTalk, these products are ideal for IBM Mainframe and
AS/400 sites that are migrating from pure IBM networks to LAN
environments.
This manual is applicable for the AXIS 5570e with firmware version 7.10
or higher, providing introductory information as well as detailed
instructions on how to set up and manage the print server in various
network environments. It is intended for everyone involved in installing
and managing the print server. To fully benefit from this manual, you
should be familiar with basic networking principles.
These instructions are based on the settings in a new and unconfigured
print server. To reload the default parameters, you can perform a Factory
Default, which will restore most of the settings. See "Performing a Factory
Default" on page 208.
AXIS 5570e User's Manual
Advertisement
Table of Contents
