Installation In Mac Os X Using Appletalk; Installation Of Lpr Printing In Mac Os X - Axis 27980R1 User Manual

Installation in Mac OS X using AppleTalk

Installation of LPR printing in MAC OS X

AXIS 5570e User's Manual
This section describes setting up your print server for printing in the Mac
OS X.
1. Start Print Center (from Go | Applications | Utilities | Print Center)
2. Select Printers | Add Printer...
3. From the Printer List dialog, select AppleTalk.
4. Now, the ports of your print server will appear in the list of available printers.
The port is shown as <host name>_<port>.
Example: AXIS100086_LPT1.
5. Select the print server port you want to use.
6. Select an appropriate printer driver for your printer from the Printer Model
drop-down list. If the printer is not available in the list, select Generic.
(Note: Generic is only used for postscript printers.)
You can also browse for a printer driver on your computer or network by
selecting Other... from the list.
7. Click Add to complete the installation.
If you want to print using LPR, select:
1. Printers | Add Printer...
2. From the Printer List dialog, select LPR printers using IP.
3. Enter the IP address or host name of the print server in the LPR printer's
Address field. You must uncheck the Use Default Queue on Server check
box and enter a Queue Name:
Ports available USB port
AXIS 5570e USB1
Choose a printer driver from the Printer Model list and click Add to finish.
Adding Printers in Macintosh
Parallel port 1 Parallel port 2
LPT1 —
Serial port
—
83