Table of Contents
Advertisement
Setting Up - IBM Mainframe (zSeries)
Verifying the
Communication:
44
6. Click OK.
SNA Server Manager Main Window
SNA Server - Axis Network Print Server connection
1. Select the new LUA and drag it to the TN3270 connection definition
(highlighted in the SNA Server Manager Window above).
2. Select the properties of the LUA.
3. Click the TN3270 tab in the properties popup window.
4. Select Generic Printer Type.
5. Click the IP Address List tab.
6. Specify the IP Address of the client(s) that you want to assign to this LU. This
is the IP address of the Axis Network Print Server, i.e. the same as the
INT_ADDR parameter in the Print Server.
7. Click OK.
1. Activate the connection you created in step 2 of the above SNA Server -
Axis Network Print Server connection procedures. The status of the
connection should be "active".
2. Make sure the corresponding LU in the host is activated.
3. Activate the TN3270 connection to the Axis Network Print Server. The LUA
should change status to SSCP.
4. Check that the printer is connected to the Axis Network Print Server.
5. Send a print job from the host.
The Axis Network Print Server is now ready for use.
AXIS 5570e User's Manual
Advertisement
Table of Contents
