Axis 27980R1 User Manual page 137

Example:
Viewing
the Status file
Performing Resets
AXIS 5570e User's Manual
> telnet npserver
Trying 192.36.253.96...
Connected to npserver.
Escape character is '^]'.
AXIS 5570e TELNET Network Print Server V7.10 Oct 04 2006
AXIS 5570e network login: root
Password: pass
AXIS 5570e TELNET Network Print Server V7.10 Oct 04 2006
Root> account
Current account file:
JOB USER PROT
2 LSLM_user LAN Server/Man. PR1
1 Administrator LPD
Root>
Typical Telnet session to view the Account File
The status command shows which printer port the logical printers are
assigned to, and their current status.
Follow the instructions below to view the status file using telnet:
1. Log in to the Axis Network Print Server by typing:
telnet <host name>
(Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
3. View the status file by typing:
Three types of reset commands allow you to perform soft resets, to
perform hard resets, and to reset the print server's parameters to its
default settings.
Follow the instructions below to perform a soft reset using telnet:
1. Log in to the Axis Network Print Server by typing:
telnet <host name>
(Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
3. Restart the print server's protocols by typing:
softreset
Replace the command in step 3 above with
perform the other two reset operations.
Management and Configuration
(not visible)
PORT S
C
pr1 C
or
telnet <IP address>
status
or
telnet <IP address>
hardreset
BYTES ETIME
188313 1
244513 1
in a DOS window
and .)
root pass
in a DOS window
and .)
root pass
to
or
default
137