Axis 27980R1 User Manual page 90

Adding Printers in NetWare
90
9. You will find the print server in the next window with the printer attached
on the connected port. Depending on the transport protocol you used when
you start the installation, the print server should appear as following:
• TCP/IP Network protocol:
IP Address and Port, e.g: 192.168.70.243 and LPT1
1. Only the ports with a connected printer show up in this window. If the
printer is not in the displayed print list, click Manually specify the print
server and do the following:
Enter the print server's IP address in the IP Address Field
2. Choose a port in the Print Server Port field
e.g., 192.168.70.243 and LPT1
The available ports are :
Ports available USB port
AXIS 5570e other/unknown
Note: "other/unknown", stands for the USB1 port.
Parallel port 1 Parallel port 2
LPT1 —
AXIS 5570e User's Manual
Serial port
—