Axis 27980R1 User Manual page 22

Setting Up - AS/400 (iSeries)
Note:
The AS/400 Host
System Checklist
Note:
22
SNA is only available for print server models with the SNA option installed. Please refer to
Protocols and Datastreams, on page 9.
Configuring for SNA printing in 5494 Mode is described in three separate
stages:
• The AS/400 Host System Checklist
• Configuring the Axis Network Print Server
• Verifying the communication
If you are using AS/400 Version 3 Release 1 or higher, the AS/400 host in
5494 CU mode is automatically configured. The instructions in this
section describe this automated configuration procedure.
If you are using a pre-version 3 release, you must perform the
configuration procedure manually. If this is the case, please refer to the
Axis Web site for further documentation.
You will find an AS/400 Parameter checklist in the AXIS 5570e User's Guide where you can
enter the values described in this section for future reference.
on the AS/400 command line and press Enter. For future
1. Type
DSPNETA
reference, note the values of the
parameters. Press F3.
location
Example:
DSPNETA
Display Network Attributes
System: S1032BB0
Current system name
Pending system name
Local network ID . . . . . . . . . . . . . . . . : > APPN
Local control point name . . . . . . . . . . . . :
Default local location . . . . . . . . . . . . . : > S1032BB0
Default mode . . . . . . . . . . . . . . . . . . :
APPN node type . . . . . . . . . . . . . . . . . :
Data compression . . . . . . . . . . . . . . . . :
Intermediate data compression
Maximum number of intermediate sessions
Route addition resistance
Server network ID/control point name . . . . . . :
*ANY
Press Enter to continue.
F3=Exit F12=Cancel
The required parameter values are highlighted in bold.
2. Type
WRKLIND *ELAN
to get a list of all line descriptions on the system. Type
description and press Enter.
Local network ID
. . . . . . . . . . . . . . :
. . . . . . . . . . . . . . :
. . . . . . . . . :
. . . . :
. . . . . . . . . . . :
and press Enter:
and
Default local
S1032BB0
S1032BB0
BLANK
*ENDNODE
*NONE
*NONE
200
128
*LCLNETID
More...
in front of the line
5
AXIS 5570e User's Manual