Level-Setting Procedure - PRESONUS STUDIOLIVE 16.4.2 - V1.12 User Manual

5 Tutorials
Level Setting Procedure
5.8
Setting the proper levels is an important part of getting the right sound. The following steps will
assist you in quickly setting your levels.
1) Turn each of the 16 trims to 0/-20.
3) Press the Input button in the Meter Section
3) In the Solo bus section, select PFL and turn
the Cue level to 12:00.
4) Select the Solo button in the Monitor section
and adjust the volume for your headphones
or control-room monitors.
5) Solo your first channel and turn the trim to the
desired level on the meter. Be careful not get
the signal above 0 dBFS. You do not want to
clip the ADC converters.
When all else fails, just remember: button, button, knob, button, knob, button, knob
127