Scene Store And Recall; Copy And Load; Universal Control And Multiple Mixers - PRESONUS STUDIOLIVE 16.4.2 - V1.12 User Manual

4 Multiple Mixers
4.1 Getting Started

Scene Store and Recall

4. 1 .5
Channel Strip presets, Effects presets and mix Scenes are stored and recalled locally on each mixer.
However, if you are creating a mix Scene, the name that you create on any of the mixers will be
transmitted to the entire chain. For example, if you store a scene named "3 Mixer Show" on the
Master unit, the name is broadcasted to the slaved units so when you press the Scene and Store
buttons on either Slave, the name you just created on the Master unit is already entered; all you have
to do is scroll to an empty location and press the Store button again.

Copy and Load

4. 1 .6
Channel strip settings from any channel or bus on any mixer in the chain can be copied to any other
channel or bus on any other mixer in the chain. For example, if you select Channel 4 on Slave 2 and
press the Copy button, every Select button on every mixer in the chain will begin to flash. To paste
the Channel 4 settings to any other channel simply press that channel's Select button, it will stop
flashing and will illuminate. Press the Load button to paste the Fat Channel setting.
Universal Control & Multiple Mixers
4. 1 .7
Because of FireWire limitations, you can only record additional buses from the Master unit when two
mixers are connected to a computer. While the Launcher Window will show a Device Window Button
for each or the two StudioLives connected, only the Master Unit's Auxiliary Input Router will open
when either button is clicked.
81