PRESONUS STUDIOLIVE 16.4.2 - V1.12 User Manual page 56

2 Controls & Connections
2.10 Digital Effects | Master Control
Creating & Recalling a Scene
2. 1 0.2
The Fat Channel will be restored to the same setting for every input and output on your StudioLive.
Each of the dynamics as well as the four bands of the EQ will be turned off. Their parameters will
be set as follows:
HIPASS NOISE GATE
OFF THR N/A
REL .05 s
Before beginning any new mixing situation, it is always recommended to recall the Zero Out (Board
Reset) scene. This is the easiest way to ensure that there are no lingering parameter settings that
could cause you some trouble in your new mix.
To recall a Scene, press the Scene button and
use the Value encoder to scroll through the
Scene library. When you have found the Scene
you wish to recall, press the Recall button.
By default, the StudioLive will recall all of the
available stored parameters
settings, fader and knob positions, channel
muting and soloing, aux mixes, and internal
effects parameters); if you do not wish to recall
a certain set of parameters, simply use the Next
and Prev buttons to navigate through the screen. When the parameter that you wish to disable is
selected, turn the Value Encoder counter-clockwise to move it to the No (off) position. Once you
have disabled the parameters you do not wish to recall, press the Recall button. The StudioLive's
recallable parameters are grouped as follows:
• Mute: All channel and bus mutes (Channels 1-16, Subgroups 1-4, FXA, FXB)
• FX: All parameters for the internal effects assigned to FXA and FXB
• Assigns: All output and bus routing (Mains, Subgroups, Stereo Linking, Solo and Monitor
bus assignments, and Internal Effects to Aux Bus routing)
• EQ & Dyn: All Fat Channel dynamics processing and filter parameters (Phase, High Pass,
Noise Gate, Compressor, EQ, and Limiter) for every channel and bus
• Aux Mix: All aux mixes (analog Aux Mixes 1-6 as well as FXA and FXB mixes)
• Faders: All fader positions
• Pots: All knob positions (Aux 1-6 Outputs, FXA and EFXB Levels, Cue, 2 Track In, Phones,
Monitor, and Aux Input A and Aux Input B knobs)
• GEQ: Graphic EQ settings
FAT CHANNEL PARAMETERS
LIMIT COMPRESSOR
OFF THR 0dB
RAT 2:1
ATK 20 ms
REL 150ms
GAIN 0dB
KNEE hard
(Fat Channel
56
EQ LOW L.MID
P/S shelf n/a
H/L n/a low
FREQ 130Hz 320Hz
GAIN 0dB 0dB
H.MID HIGH
n/a shelf
n/a low
1.4kHz 5kHz
0dB 0dB