Advanced Wdm Features (Pc Only) - PRESONUS STUDIOLIVE 16.4.2 - V1.12 User Manual

3 Recording
3.3 Using Your StudioLive as an Audio Interface

Advanced WDM Features (PC only)

3.3.4
Just like the award-winning FireStudio family of interfaces, the StudioLive features some advanced
WDM features to enhance its use as an audio interface. In the upper left hand corner of the Universal
Control Launcher window, you will find the Settings menu, from here you can configure your WDM
input and output streams. Mac users: please skip to the next section for important information
about using your StudioLive as your main Core Audio device.
1) In the Launch window, go to Settings | WDM setup
2) The WDM Channel Mapper window will open. By
default WDM Outputs 1 and 2 are routed to StudioLive
Channels 1 and 2. As previously mention, it is
recommended that they be set, instead, to Channels
17 and 18, so as not to use up input channels on
your StudioLive just for WDM playback. To begin,
check the box next to Output. Click on WDM 1 (Front
Left) and drag it down to place it next to StudioLive
2TrackIn Left. Click on WDM 2 (Front Right) and drag
it down to place it next to StudioLvie 2TrackIn Right.
Your stereo WDM playback will not be routed directly
to the Main FireWire Return buttons in the 2TrackIn
and Monitor bus in the StudioLive Master Section.
74