PRESONUS STUDIOLIVE 16.4.2 - V1.12 User Manual page 29

2 Controls & Connections
2.3 The Fat Channel
Dynamics Processing and EQ
2.3.2
High Mid EQ Button
High Mid Band EQ Frequency
Control
Hi Q Button
Activates Controls for the High Mid Band EQ for the
Selected Input or Output Bus.
This button actives the control for the High Mid band for
the selected input or output. The button will illuminate to
indicate that the control is active.
The High Mid Band EQ is available for all input and
output buses.
Sets and Displays the Center Frequency of the High
Mid Band EQ.
This encoder sets, and the meter displays, the center
frequency of the High Mid band. You can adjust the Q
from 380 Hz to 5 kHz.
Enables a Narrow Bandwidth for the High Mid Band
EQ on the Selected Input or Output.
Q is the ratio of the EQ band's center frequency to its
bandwidth. With a constant center frequency, higher Q
values indicate a narrower bandwidth. By default, the
High Mid EQ is set to a low Q = 0.55. When the Hi Q
button is engaged, the bandwidth will narrow to 2.0 to
provide more exact control.
29