PRESONUS STUDIOLIVE 16.4.2 - V1.12 User Manual page 30

2 Controls & Connections
2.3 The Fat Channel
Dynamics Processing and EQ
2.3.2
High Mid Band EQ Gain Control
High Band EQ On/Off Button
High Band EQ Frequency Control
Sets and Displays the Gain Attenuation or Boost at
the Center Frequency.
This encoder sets, and the meter displays, the gain cut
or boost at the center frequency of the High Mid band.
The level of the center frequency can be set between -15
and +15 dB.
Activates Control for the High Band EQ for the
Selected Input or Output Bus.
This button actives control of the High band for the
selected channel or bus. The button will illuminate to
indicate control is active.
The High Band EQ is available for all input and output
buses.
Sets and Displays the Center Frequency of the High
Band EQ.
This encoder sets, and the meter displays, the center
frequency of the High band. You can adjust the center
frequency from 1.4 to 18 kHz.
30