Setting Up Your Mac - PRESONUS StudioLive Series III Networking Manual

3 Configuring Your AVB Network
3.1 Using AVB with a StudioLive Series III mixer and a Mac

Setting Up Your Mac

3.1.3
1. Open Audio/MIDI Setup.
2. Go to Window>Show Network Devices Browser.
3. Check the box next to "StudioLive 32" to enable the mixer to be
used as a Core Audio device (this may take a moment).
Once your computer has successfully connected to your StudioLive Series III mixer,
your mixer will appear in Audio MIDI Setup as an available audio device that you can
use with any software that supports Core Audio (Studio One, Pro Tools, Logic, etc.).
StudioLive™ Series III
AVB Networking Guide
14