PRESONUS STUDIOLIVE 16.4.2 - V1.12 User Manual page 28

2 Controls & Connections
2.3 The Fat Channel
Dynamics Processing and EQ
2.3.2
Low Mid EQ Button
Low Mid Band EQ Frequency
Control
Hi Q Button
Low Mid Band EQ Gain Control
Activates Controls for the Low Mid Band EQ for the
Selected Input or Output Bus.
This button actives the controls for the equalizer's Low
Mid band for the selected input or output. The button will
illuminate to indicate control is active.
The Low Mid Band EQ is available for all input and output
buses.
Sets and Displays the Center Frequency of the Low
Mid Band EQ.
This encoder sets, and the meter displays, the center
frequency for the Low Mid band. You can adjust the
center frequency from 90 Hz to 1.2 kHz.
Enables a Narrow Bandwidth for the Low Mid Band
EQ on the Selected Input or Output.
Q is the ratio of the EQ band's center frequency to its
bandwidth. With a constant center frequency, higher
Q values indicate a narrower bandwidth, so Q is often
equated with bandwidth. By default, the Q is set to
a value of 0.55. When the Hi Q button is engaged, the
Q setting will be increased to 2.0, thus narrowing the
bandwidth to provide more precise control.
Sets and Displays the Gain Attenuation or Boost of
the Center Frequency for the Low Mid Band.
This encoder sets, and the meter displays, the Gain cut
or boost at the center frequency of the Low Mid band.
The level of the center frequency can be set between -15
and +15 dB.
28