Effects Processing - PRESONUS STUDIOLIVE 16.4.2 - V1.12 User Manual

5 Tutorials
5.6 Aux Bus mixing

Effects Processing

5.6.2
There are at least two advantages to using an aux bus for an effects processor rather than using a
channel insert: several channels can be sent to a single processor, and you can vary the level sent
from each channel to the processor, allowing you to create an effects mix.
The StudioLive features two internal effects buses. These are used much in the same way the aux
buses are used to create monitor mixes, as described in the previous section. This section will
detail how to utilize an external effects processor with your StudioLive mixes.
In this example, we will use Aux 3 to feed an external effects processor. To begin, connect your
external effects processor to your StudioLive as detailed in the hookup diagram below:
123