Track In - PRESONUS STUDIOLIVE 16.4.2 - V1.12 User Manual

2 Controls & Connections
2.9 Master Section

2 Track In

2.9.3
The StudioLive allows you to patch in an analog input or a playback stream from your recording
application. This enables you to compare audio sources during mixdown or patch in intermission
music between bands without using any of your 16 input channels. This is a summing bus, so both
the external tape input and the two-track FireWire return can be engaged at the same time.
2 Track In Volume Control
Tape Input On/Off Button
FireWire Source On/Off Button
Adjusts the Level for the Tape Input.
This knob adjusts the level for both the tape input and the
main FireWire return.
Sends the Tape Input to the Mains.
This button patches the Tape input to the main outputs.
It will illuminate to indicate that the Tape input is being
sent to the mains. To disable the routing, simply press
the button again.
Sends the Master Out from the Audio Application to
the Mains.
This button routes the main left/right FireWire returns
(Outs 17-18) to the main outputs. It will illuminate to
indicate that the main FireWire return is being sent to the
main outputs of the StudioLive. To disable the routing,
simply press the button again.
48