Table of Contents
Advertisement
M-series and MX-series Devices
Table 61: Assigning Forwarding Classes to Output Queues
Task
Assign best-effort traffic to queue 0.
Assign expedited forwarding traffic to
queue 1.
Configure an assured forwarding class
classifier.
Related
Documentation
130
Cancel—Cancels the modifications.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See the Network
and Security Manager Administration Guide for more information.
Action
1.
Select Queue and click Add new entry.
2. In the Queue num box, type 0.
3. In the Class name box, type the previously configured name of the best-effort
class—for example, be-class.
4. Click OK.
1.
Select Queue and click Add new entry.
2. In the Queue num box, type 1.
3. In the Class name box, type the previously configured name of the expedited
forwarding class—for example, ef-class.
4. Click OK.
1.
Select Queue and click Add new entry.
2. In the Queue num box, type 3.
3. In the Class name box, type the previously configured name of the assured
forwarding class—for example, af-class.
4. Click OK.
Configuring CoS Classifiers (NSM Procedure) on page 124
Configuring CoS Code Point Aliases (NSM Procedure) on page 126
Configuring CoS Drop Profile (NSM Procedure) on page 127
Configuring CoS Interfaces (NSM Procedure) on page 134
Configuring CoS Rewrite Rules (NSM Procedure)
Configuring CoS Schedulers (NSM Procedure) on page 141
Configuring CoS and Applying Scheduler Maps (NSM Procedure) on page 143
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
