Release Overview; Before You Start - Juniper JUNOSE SOFTWARE 10.2.2 - RELEASE NOTES 6-4-2010 Release Note

Release Overview

Before You Start

These Release Notes cover Release 10.2.2 of the system software for the Juniper
Networks E Series Broadband Services Routers and contain the following sections:
Release Highlights on page 7
Early Field Trial Features on page 7
Unsupported Features on page 9
Release Software Protocols on page 10
SRC Software and SDX Software Compatibility Matrix on page 12
Known Behavior on page 12
Known Problems and Limitations on page 34
Resolved Known Problems on page 52
Errata on page 54
Appendix A, System Maximums on page 61
Appendix B, Module Name Cross-Reference Information on page 103
Appendix C, Transferring DSL Line Rate Information from an Access Node to SRC
Software on page 105
If the information in these Release Notes differs from the information found in the
published documentation set, follow these Release Notes.
These Release Notes include information about the changes between Releases
10.2.1 and 10.2.2. Before you use your new software, read these Release Notes in
their entirety, especially the section Known Problems and Limitations. You need the
following documentation to fully understand all the features available in Release
10.2.2:
These 10.2.2 Release Notes, which describe changes between Release 10.2.2
and Release 10.2.1
The 10.2.1 Release notes, which describe the features available in Release
10.2.1
The 10.2.x documentation set, which provides detailed information about
features available in Release 10.2.0
Release 10.2.2
5
Release Overview