Juniper JUNOSE SOFTWARE 10.2.2 - RELEASE NOTES 6-4-2010 Release Note page 100

JUNOSe 10.2.2 Release Notes
Table 11: Routing Protocol Maximums (continued)
Feature
ECMP maximum paths to a destination
BGP, IS-IS, MPLS, OSPF, RIP
IPv4 forwarding table entries per chassis
(See Note 1 on page 91.)
IP network interfaces (IPv4 and IPv6)
Per chassis
(See Note 2 on page 91.)
Per ES2 4G LM
Per ES2 10G LM
Per ES2 10G ADV LM
Per ES2 10G Uplink LM
IPv4 routing protocol scaling and peering densities
(See Note 3 on page 91.)
Routing table entries
(See Note 4 on page 91.)
ANCP Adjacency Scaling
(See Note 5 on page 91.)
BGP-4 peering sessions
BGP-4 routes (NLRI)
IP next hops (egress FECs); used to represent the IP
addresses of next-hop routers on Ethernet interfaces
MPLS next hops (egress FECs) when graceful restart is
not enabled
MPLS next hops (egress FECs) when graceful restart is
enabled
MPLS forwarding entries when graceful restart is not
enabled
MPLS forwarding entries when graceful restart is enabled 32,000
IS-IS adjacencies
IS-IS routes
MPLS LDP LSPs when graceful restart is not enabled
MPLS LDP LSPs when graceful restart is enabled
MPLS RSVP-TE LSPs when graceful restart is not enabled 10,000
MPLS RSVP-TE LSPs when graceful restart is enabled
OSPF adjacencies
OSPF routes
92
E120 and E320 System Maximums
E120
16
1,048,576
64,000
16,000
16,000
32,000
8000
500,000
5000
1000
1,500,000
1,000,000
500,000
250,000
64,000
150
20,000
10,000
5000
5000
1000
25,000
E320
16
1,048,576
96,000
16,000
16,000
32,000
8000
500,000
5000
1000
1,500,000
1,000,000
500,000
250,000
64,000
32,000
150
20,000
10,000
5000
10,000
5000
1000
25,000