Release Overview; Before You Start - Juniper JUNOSE 11.0.2 - RELEASE NOTES Release Note

Release Overview

These Release Notes cover Release 11.0.2 of the system software for the Juniper
Networks E Series Broadband Services Routers and contain the following sections:
If the information in these Release Notes differs from the information found in the
published documentation set, follow these Release Notes.

Before You Start

These Release Notes include information about the changes between Releases
11.0.1 and 11.0.2. Before you use your new software, read these Release Notes in
their entirety, especially the section Known Problems and Limitations. You need the
following documentation to fully understand all the features available in Release
11.0.2:
Release Highlights on page 7
Early Field Trial Features on page 8
Unsupported Features on page 9
Release Software Protocols on page 10
SRC Software and SDX Software Compatibility Matrix on page 12
Known Behavior on page 12
Known Problems and Limitations on page 38
Resolved Known Problems on page 56
Errata on page 60
Appendix A, System Maximums, on page 69
These 11.0.2 Release Notes, which describe changes between Release 11.0.1
and Release 11.0.2
The 11.0.1 Release notes, which describe the features available in Release
11.0.1
The 11.0.x documentation set, which provides detailed information about
features available in Release 11.0.0
Release 11.0.2
5
Release Overview