Release Overview; Before You Start - Juniper JUNOSE SOFTWARE 11.0.1 - RELEASE NOTES 7-14-2010 Release Note

Release Overview

These Release Notes cover Release 11.0.1 of the system software for the Juniper
Networks E Series Broadband Services Routers and contain the following sections:
If the information in these Release Notes differs from the information found in the
published documentation set, follow these Release Notes.

Before You Start

These Release Notes include information about the changes between Releases
11.0.0 and 11.0.1. Before you use your new software, read these Release Notes in
their entirety, especially the section Known Problems and Limitations. You need the
following documentation to fully understand all the features available in Release
11.0.1:
Release Highlights on page 7
Early Field Trial Features on page 7
Unsupported Features on page 10
Release Software Protocols on page 11
SRC Software and SDX Software Compatibility Matrix on page 13
Known Behavior on page 13
Known Problems and Limitations on page 36
Resolved Known Problems on page 55
Errata on page 61
Appendix A, System Maximums, page 67
Appendix B, Module Name Cross-Reference Information, page 109
Appendix C, Transferring DSL Line Rate Information from an Access Node to SRC
Software, on page 111
These 11.0.1 Release Notes, which describe changes between Release 11.0.0
and Release 11.0.1
The 11.0.0 Release Notes, which describe features available in Release 11.0.0
The 11.0.x documentation set, which provides detailed information about
features available in Release 11.0.0
Release 11.0.1
5
Release Overview