Release Overview - Juniper MEDIA FLOW CONTROLLER 2.0.5 - RELEASE NOTES REV 15-11-2010 Release Note

Release 2.0.5
Release 2.0.5
These Release Notes are about the changes between Juniper Networks Media Flow
Controller Release 2.0.4 and Release 2.0.5. Before you use your new software, read these
Release Notes in their entirety, especially the sections New Features and Known Issues.
•

Release Overview

•
New Features
•
Known Behavior
•
Resolved Known Issues
•
Known Issues
•
Release Installation for VXA Series: Upgrading to the Latest Release
•
Release Installation for Generic Hardware: Guidelines
•
Connecting and Logging In
•
Configuring Basic Network Connectivity
•
Upgrading (Web Interface)
•
Upgrading (CLI)
•
Requesting Technical Support
•
Related Documentation
Important!
Release Overview
These Release Notes cover Release 2.0.5 of the Juniper Networks Media Flow Controller
system software.
Note! If the information in these Release Notes differs from the information found in the
published documentation set, follow these Release Notes.
Note! Release 2.0.0 and Release 2.0.1 were released earlier for controlled usage such as
evaluation, proof-of-concept, and so forth. Release 2.0.2 through Release 2.0.5 are the
recommended releases for large-scale deployments.
Please see the
Copyright © 2010, Juniper Networks, Inc.
See the Media Flow Controller 2.0.4 Release Notes
Media Flow Controller 2.0.4 Release Notes
Media Flow Controller 2.0.5 Release Notes
for additional information.
for additional information.
Release Overview 7