Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 267

show ipsec identity
show ike identity
NOTE: The show ike identity command has been replaced by the show ipsec identity
command and may be removed completely in a future release.
09443381900005615652631560044304863856421739848326865877661787314144447
8276502323232108941157077
Exponent e ( 17 bits) :
65537
Extensions =
Available = subject key identifier, key usage, basic
constraints(critical),
CRL distribution points, unknown
KeyUsage = DigitalSignature NonRepudiation KeyCertSign CRLSign
BasicConstraints =
cA = TRUE
[critical]
CRLDistributionPoints =
% Entry 1
FullName =
Following names detected =
URI (uniform resource indicator)
Viewing specific name types =
URI = http://vtsca1/CertEnroll/VTS%20Root%20CA.crl
% Entry 2
FullName =
Following names detected =
URI (uniform resource indicator)
Viewing specific name types =
No names of type IP, DNS, URI, EMAIL, RID, UPN or DN detected.
SubjectKeyID =
KeyId =
15:0a:17:4d:36:b6:49:96:fa:d5:be:df:51:3e:e4:90:51:a2:c0:95
Unknown 1.3.6.1.4.1.311.21.1 =
02:01:00
Fingerprints =
MD5 = 8c:56:fb:a6:bd:ab:13:67:e6:13:09:c1:d0:de:1f:24
SHA-1 = 22:3d:84:6d:d4:5f:18:87:ae:2c:15:7d:2a:94:20:ff:c6:12:fb:6f
See show ike certificates.
See show ipsec certificates.
Use to display the IKE identity configuration.
Field descriptions
Domain Name Domain name the router uses in IKE authentication
messages and to generate certificate requests
Common Name Common name used to generate certificates
Chapter 8: Configuring Digital Certificates
Monitoring Digital Certificates and Public Keys
...
241