Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 340

JUNOSe 11.1.x IP Services Configuration Guide
314
Monitoring DVMRP/IPSec, GRE/IPSec, and L2TP/IPSec Tunnels
Tunnels are single-shot Indicates that single-shot tunnels are configured
for this host profile
Current session count is Number of current sessions for the host profile
Example
host1#show l2tp destination profile westford
L2TP destination profile westford
Configuration
Destination address
Transport ipUdp
Virtual router default
Peer address 172.31.1.99
Statistics
Destination profile current session count is 1
Host profile attributes
Remote host is lac-1
Configuration
Tunnel password is password
Interface profile is tunneled-user
Local host name is lns-1
Ipsec transport is enabled
Disconnect-cause avp is enabled
Tunnels are single-shot
Statistics
Current session count is 1
1 L2TP host profile found
See show l2tp destination profile.