Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 130

JUNOSe 11.1.x IP Services Configuration Guide
5.
6.
cache entries
cache timeout
enabled
export destination
104
Configuring Flow-Based Statistics Collection
host1(config-flow-cache)#export destination { hostname | ip address }
udp-port-number
Set the source IP address for datagrams containing information from this cache:
the no version removes the explicit setting of the source address.
host1(config-flow-cache)#export source interfacetype interface
Enable the aggregation cache.
host1(config-flow-cache)#enabled
The aggregation cache starts accumulating information from the flow cache; the
no version stops the accumulation of information from the flow cache, but does
not suspend the operation of the flow cache.
Use to set the number of entries in the aggregation cache.
Example
host1(config-flow-cache)#cache entries 524288
Use the no version to reset the number of entries to the default value 4096.
See cache entries.
Use to set the active and inactive timers.
Example
host1(config-flow-cache)#cache timeout active 50
Use the no version to reset the default value.
See cache timeout.
Use to enable the aggregation cache to accumulate information form the flow
cache.
Example
host1(config-flow-cache)#enabled
Use the no version to stop the information flow from the flow cache.
See enabled.
Use to configure an export destination for the aggregation cache.
Example