Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 137

show ip flow sampling
Use to display configuration values for IP flow cache export.
Example
host1#show ip flow export
Flow export is enabled using version 5 format.
Exporting to 10.0.0.2 port 9898 using source ip interface
GigabitEthernet5/0/0.
See show ip flow.
Use to display configuration values for IP flow cache sampling.
Example
host1#show ip flow sampling
Flow sampling is enabled
'Packet Interval' sampling mode is configured.
1 out of every 1000 packets is being sampled.
See show ip flow.
Chapter 3: Configuring J-Flow Statistics
Monitoring J-Flow Statistics
111