Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 236

JUNOSe 11.1.x IP Services Configuration Guide
host1# show l2c label brief
Interface
-------------------------
ATM4/0.300
ATM4/0.301
ATM4/0.302
ATM4/0.303
ATM4/0.304
Interface
-------------------------
ATM4/0.11
ATM4/0.12
ATM4/0.13
ATM4/0.14
show l2c neighbor
210
Monitoring ANCP
Interface: ATM2/0.304
End-User-Id: Accessnode_10 atm2/6:0.0
Neighbor: accessnode _1004
Max-Branches: 5
Example 2
End-User-Id
-------------------------
Accessnode_10 atm2/2:0.0
Accessnode_10 atm2/3:0.0
Accessnode_10 atm2/4:0.0
Accessnode_10 atm2/5:0.0
Accessnode_10 atm2/6:0.0
Peer-Attach-Id
-------------------------
Accessnode_10 atm3/2:0.10
Accessnode_10 atm3/3:0.10
Accessnode_10 atm3/4:0.10
Accessnode_10 atm3/5:0.10
Example 3
host1# show l2c label neighbor-input brief
Interface
-------------------------
ATM4/0.11
ATM4/0.12
ATM4/0.13
ATM4/0.14
See show l2c label.
Use to display information about all known ANCP neighbors or specified ANCP
neighbors on the router along with their configurations.
Use the brief keyword to display limited information.
Use the summary keyword to display the number of active neighbors.
Field descriptions
Neighbor Name Name associated with the neighbor
Neighbor Id ID associated with the neighbor
Maximum Branches Maximum number of branches this neighbor can have
Topology Discovery Whether topology discovery is enabled (true) or disabled
(false)
Maximum Discovery Entries Maximum number of discovery table entries
allowed
Ip address IP address of the neighbor
TCP port TCP port associated with this neighbor
Neighbor
----------------
accessnode_1002
accessnode_1002
accessnode_1002
accessnode_1004
accessnode_1004
Peer-Attach-Id
-------------------------
Accessnode_10 atm3/2:0.10
Accessnode_10 atm3/3:0.10
Accessnode_10 atm3/4:0.10
Accessnode_10 atm3/5:0.10