Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 78

JUNOSe 11.1.x IP Services Configuration Guide
show ip match-policy-list
52
Monitoring Routing Policy
Use to display community list information.
Display varies based on whether you issued the ip bgp community new-format
command.
Example 1 If you did not issue the ip bgp community new-format command,
the display appears as follows:
host1#show ip community-list
Community List 1:
permit 81200109
permit 81200110
permit 81200108
Community List 2:
deny 81200109
permit 81200110
permit 81200108
Community List 4:
permit local-as
Community List 5:
permit no-advertise
Community List 6:
permit no-export
Community List 7:
permit internet
Example 2 If you did issue the ip bgp community new-format command, the
display appears as follows:
host1#show ip community-list
Community List 1:
permit 1239:1005
permit 1239:1006
permit 1239:1004
Community List 2:
deny 1239:1005
permit 1239:1006
permit 1239:1004
Community List 4:
permit local-as
Community List 5:
permit no-advertise
Community List 6:
permit no-export
Community List 7:
permit internet
See show ip community-list.
Use to display configured policy lists.
Example
host1#show ip match-policy-list
match-policy-list list1, permit
Match clauses:
match access-list addrList1
match distance 100