Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual page 94

Configuring the Adaptive Security Appliance for a DMZ Deployment
From the Type drop-down list, choose Static.
Step 4
In the Translated Addr. field, enter the IP address of the internal client or network,
Step 5
or click ..., and choose an the address from the Browse Translated Addr dialog
box. In the IP Address field, enter In this scenario, the IP address of the network
is 192.168.1.0.
Click Advanced, and configure the following options in the Advanced NAT
Step 6
Settings dialog box.
•
•
Cisco ASA 5500 Series Getting Started Guide
8-12
In the Source Interface drop-down list, choose the Inside interface.
In the Destination Interface drop-down list, choose the DMZ interface.
These two settings specify the real and/or mapped interfaces where this NAT
rule should apply.
Chapter 8 Scenario: DMZ Configuration
78-19186-01