Connecting Interface Cables And Verifying Connectivity - Cisco ASA 5512-X Quick Start Manual

2

Connecting Interface Cables and Verifying Connectivity

Connect a management PC to the Management 0/0 interface for use with the Adaptive
Step 1
Security Device Manager (ASDM).You can connect the PC directly with an Ethernet cable, or
connect the PC and the ASA to the same management network. Make sure the PC is
configured to obtain an IP address using DHCP.
If you want to use the CLI, connect your PC to the console port, and see the CLI configuration
guide for more information.
Connect your networks to the appropriate ports.
Step 2
1
(Optional) I/O Card.
1
fiber I/O card, you need to use SFP
modules (not included). See the
hardware installation guide for
information.
Check the LINK/ACT indicators to verify interface connectivity.
Step 3
2
Unsecured
Network
Management 0/0 interface (RJ-45)
If you have a 2
Management PC
Secured
Network
3