Chapter 11
Scenario: SSL VPN Clientless Connections
Specifying the SSL VPN Interface
Step 1
Step 2
Step 3
78-19186-01
In Step 2 of the SSL VPN Wizard, perform the following steps:
Specify a Connection Name to which remote users connect.
From the SSL VPN Interface drop-down list, choose the interface to which remote
users connect. When users establish a connection to this interface, the SSL VPN
portal page is displayed.
From the Certificate drop-down list, choose the certificate the adaptive security
appliance sends to the remote user to authenticate the adaptive security appliance.
Implementing the Clientless SSL VPN Scenario
Cisco ASA 5500 Series Getting Started Guide
11-7