Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual page 70

Chapter 6
Connecting to a 4GE SSM
Connect to fiber Ethernet ports to be used for network connections. For each fiber
Step 2
port you want to use, perform the following steps:
a.
Figure 6-5
1
Figure 6-6
Cisco ASA 5500 Series Getting Started Guide
6-8
Connecting Interface Cables on the ASA 5500, ASA 5510, ASA 5520, and ASA 5540 Platforms
Install the SFP module:
Insert and slide the SFP module into the fiber port until you hear a click.
–
The click indicates that the SFP module is locked into the port.
– Remove the port plug from the installed SFP as shown in
Removing the Fiber Port Plug
2
1
Port plug
Connect the LC connector to the SFP module as shown in
–
Connecting the LC Connector
1
2 SFP module
L N K
3
2
1
0
S P D
C is c o
S S M -4
G E
2
Figure 6-5.
Figure 6-6.
78-19186-01