What to Do Next
Figure 5-6
Removing the Screws from the Slot Cover
Step 4
Figure 5-7
Inserting the SSM into the Slot
Step 5
Step 6
Step 7
What to Do Next
Cisco ASA 5500 Series Getting Started Guide
5-10
Insert the SSM into the slot opening as shown in
Attach the screws to secure the SSM to the chassis.
Power on the adaptive security appliance. Check the LEDs. If the SSM is installed
properly, the POWER LED is solid green and the STATUS LED flashes green.
Connect one end of the RJ-45 cable to the port and the other end of the cable to your
network devices.
Continue with
Chapter 6, "Connecting Interface Cables on the ASA 5500, ASA
5510, ASA 5520, and ASA 5540 Platforms."
FL A S H
LI NK
SP D
LI NK
3
SP D
LI NK
2
SP D
LI NK
1
SP D
0
LI NK
SP D
LI NK
3
SP D
LI NK
2
SP D
LI NK
1
SP D
0
Chapter 5
Installing Optional SSMs
Figure
5-7.
78-19186-01