Example Topology Using Anyconnect Ssl Vpn Clients; Implementing The Cisco Ssl Vpn Scenario - Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual

Chapter 10 Scenario: Configuring Connections for a Cisco AnyConnect VPN Client
Example Topology Using AnyConnect SSL VPN
Clients

Implementing the Cisco SSL VPN Scenario

78-19186-01
Figure 10-1 shows an adaptive security appliance configured to accept requests
for and establish SSL connections from clients running the AnyConnect SSL VPN
software. The adaptive security appliance can support connections to both clients
running the AnyConnect VPN software and browser-based clients.
Figure 10-1 Network Layout for SSL VPN Scenario
DNS Server
10.10.10.163
Internal
Inside
network
10.10.10.0
WINS Server
10.10.10.133
This section describes how to configure the adaptive security appliance to accept
Cisco AnyConnect SSL VPN connections. Values for example configuration
settings are taken from the SSL VPN scenario illustrated in
This section includes the following topics:
Information to Have Available, page 10-4
•
Configuring the Adaptive Security Appliance for the Cisco AnyConnect VPN
•
Client, page 10-5

Example Topology Using AnyConnect SSL VPN Clients

Security
Appliance
Outside
Cisco ASA 5500 Series Getting Started Guide
AnyConnect
Client
Internet
AnyConnect
Client
Browser-based
client
Figure 10-1.
10-3