Overview; Enabling The Appletalk Protocol; Configuration For Appletalk - Kyocera Ai5555 Instruction Handbook Manual

AppleTalk Configuration & Administration Program

Overview

This section explains how to configure and use the AppleTalk Administra-
tion Program so that printing can be performed from a Macintosh system.
The AppleTalk Administration Program is used to perform the following
functions:
q
Change the network zone and/or change printer names for NC-2
printers.
q
Assist Customer Support diagnose problems.

Enabling the AppleTalk Protocol

The AppleTalk protocol must be enabled before printing can be performed.
Use the Network Management Utility for Windows to check or to enable the
AppleTalk protocol.
Refer to Chapter 3, NetWare Configuration for more details.

Configuration for AppleTalk

q
Print to our Printing System by using Chooser to select
the network and printer.
q
Our Printing System is found in Chooser as
NC-2<serial_number> 1, where 1 stands for the printer
connected to parallel [port 1].
4-2 AppleTalk Configuration & Administration Program