Configuring The Network Protocol - Kyocera Ai5555 Instruction Handbook Manual

Installation

Configuring the Network Protocol

After installation is completed, configure and activate your network
protocol to work with the NC-2.
• For NetWare configuration, refer to Section 3, NetWare
Configuration, which shows you how to use the Printer
Management System with MAP (Management Access Program).
(See next page for Utility Installation instructions.)
• For AppleTalk configuration, refer to Section 4, which shows you
how to use the AppleTalk Configuration and Administration
Program.
• For TCP/IP configuration information, refer to Section 5, Unix
Printing Through TCP/IP.
Installation 2-5